How to Properly Maintain Your 3D Printing Machine?


When the topic of conversation shifts into the finicky piece of hardware, nothing can be fussier than how a 3D printing machine is. Who in the right frame of mind will want to deal with a breakdown or be put to a halt by a filament problem when he is in the middle of doing his own 3D printed masterpiece.  Much like any other appliance or highly- sensitive office equipment, you need to provide to your 3D printer the proper care it needs, not just to optimize its service life but to also get the most value out of it. 

The truth about 3D printers is that the quality of their manufacture is not something that we would want them to be in. In short, they are made in a tacky fashion and most probably even some of the well-known brands are making use of second-rate components in manufacturing their product offerings. This is the underlying reason why most owners of 3D printers are finding themselves

It is at this point that maintenance for 3D printer comes in. For them to get the costs of its hardware components down, although we are not generalizing that all manufacturers are into this kind of practice but some are. Some manufacturing firms have tried to get away with their using inferior quality components. The ones who are on the losing end here are the owners who were led to go beyond than just giving their piece of equipment the normal maintenance and modding routine, compared to how you’d normally do on any standard household appliance. 

The quality of these machines is coming up. But as of the moment, things are like that. It is what it is, but here are some valuable tips that will help you get around this problem.  

Have Your 3D Printer Regularly Lubricated

Much like how your car engine works. Your 3D printing machine comes with lots of lots of metal moving parts. If you don’t keep the linear bearings and rods for seizing up, it can lead to sudden stoppages.  But you’re not supposed to use motor oil, though. What works well here? Sewing machine oil. You only need to have a drop on the rails, and that is supposed to do the trick.  

Your Filament Nozzle Should be Cleaned 

The quality of your 3D printing can be adversely impacted by clogging on the filament nozzle. Even if it is just a tiny clog, it tends to foul up your design, or it could render your piece to have weaker structural integrity as to how it otherwise might be.  If you will notice there is just a curve while the filament is coming down from the nozzle, you should take it as a sign that you have got a problem.  

It is such a relief to know that this is straightforward maintenance for your 3D printing machine. You can move your nozzle and take it out from your 3D printer.  To carry this out, you may need to have on hand a razor blade, some tape, a glass jar, and some acetone. You may get this from your hardware store.  

Get Your Extruder Gear Clean

This part here comes with a risk. Debris build-up can sabotage this after several printing jobs has been carried out. Initially, you need to unscrew your printer’s extruder and out from it.  Remove the extruder cover afterward. Hex keys may come in handy here so you can remove the screws that secure the fan in place. Concerning the unit model that you have, you may need to dismantle some more just so you can reach the extruder. Once you reached it, with the help of any sharp tool you can use, you need to scrape the gunk off of it. 

 Update the Firmware of Your 3D Printer

3D printers work in much the same way as your desktop computer. It is of paramount importance that you see to it that its firmware is always up to date all the time. Provided that you are having your hardware well-maintained and your machine became buggy, you have a good chance that other users may have already identified what the problem is and you can resolve it by downloading an update.  

Water Jet Cutting versus Laser Jet Cutting and Plasma Cutting

Although water jet cutting, plasma cutting, and laserjet cutting are all high-tech and highly accurate methods of metal sheet fabrication, it would benefit us most to know which among these three is the most indispensable and can provide the most required industry applications. The looming question here is, is it laser, plasma, or waterjet cutting machine that you need for your project? 

Almost everyone who is involved in the metal fabrication industry, at one point in time, has come across this question. But then again, we can’t say that there is a definitive answer to this. Simply because it will take into account what you value most. We intend to find a solution to this dilemma by breaking down the technical and economic aspects of these 3 metal cutting solutions.  

High Definition Plasma Cutting

A plasma jet cutter will make use of an electrically-conductive gas to transfer energy from an electrical power source to its plasma cutting torch, then going into the material that is being cut. Highly celebrated for its ability to cut through a variety of metals, plasma cutting method is best described as among the most cost-effective among the three options as indicated below: 

Advantages

  • Ability to cut through a wide array of metals
  • Rapid cutting speeds
  • Delivers cutting accuracies to 0.008” scale
  • Economical
  • Impressive hole quality

Disadvantages 

  • Less accuracy compared to laser and water jet cutting
  • Requires changing of the cutting edge every time you need to deal with different materials.
  • Creates foul-smelling fumes during the cutting process
  • Poor edge quality on a few select materials
  • Laser Cutting

As the name itself suggests, in the laser cutting method, the medium for cutting through a material is a laser beam. Compared to plasma cutting, laser method offers greater cutting precision and at the same time, it is more cost-effective because it requires fewer amounts of energy, most especially when cutting through steel and aluminum. 

Advantages of laser cutting

  • Fast cutting  speed
  • Reliable
  • Efficient job processing
  • Cuts out intricate shapes at faster speeds, at the same time it eliminates the need for tooling.
  • Capable of cutting through a wide variety of materials with different levels of thicknesses
  • Capable of cutting through narrow widths
  • Can cut both nonmetals and metals

Disadvantages 

  • May come as an expensive cutting method. 
  • Power hog
  • Requires high levels of accuracy to place a target for lasers
  • Not applicable to reflexive metals

Water Jet Cutting

When it comes to waterjet cutting, it is your call if you want to use high-pressure water mixed with an abrasive material. Typically used for this purpose is granite powder. Or if you want, depending on the material you are utilizing for your project, you can just have plain but high-pressured water. 

Plain water jet cutting is used to cut through “soft” materials like wood, but when your project involves cutting through a tougher object such as steel you need to abrasive materials to the water. Here are some of the valid reasons why the use of waterjet cutting machine is more advantageous than other alternative material cutting methods.  

Advantages of Waterjet cutting

  • Capable of  cutting through virtually all kinds of material
  • The complete absence of heat-affected zone (HAZ) on the material adjacent to the cut  (this helps maintain its form)
  • Does not create hazardous waste
  • Minimal disposal costs
  • High level of accuracy and precision cutting
  • Capable of cutting through thick materials

Disadvantages of Waterjet cutting

  • The process is likely to generate abrasive dust which can get in the way in the movement of machine parts.
  • Takes a while to cut most metals
  • With a tendency to create noise, unless cutting work is carried out underwater
  • Abrasive materials are pretty expensive to purchase.

After delving deep into the advantages and disadvantages of each of these metal cutting methods, let us now carefully examine how they compare against each other.  

Cost

Concerning the purchasing cost, we qualify plasma cutting as the easiest on the budget while laserjet is certainly on the exorbitant  side. When it comes to the operating cost, taking into account the required materials that will be used for each machine, plasma cutting system would again fare the lowest price, which makes the use of waterjet cutting technology as the most expensive. 

Speed of Operation

The cutting speeds by which these metal cutting methods come in is vital in determining their production rate. It is completely normal for waterjet cutting machines to take some time to finish and get done with a particular cutting job, especially if the material itself is thick. So yes, waterjet cutting method is the slowest and followed by laserjet. When it comes to speed, the fastest metal cutting method is plasma.  

Cutting edge quality

You can easily determine a cutting machine’s level of precision by making a comparative analysis of the actual measurements of the resulting part to the programmed part size. On the premise that there is less heat distortion, we qualify waterjet cutting as most accurate and trailing behind this is laser cutting followed finally by plasma cutting. But it would be worth mentioning here also is that laserjet can have distortion on thick materials.  

The Different Types of Oil Skimmers

The Different Types of Oil Skimmers

Oil skimmers are responsible for collecting thousands of gallons of crude oi. What is amazing about them is that in spite of having a lot of press in such massive cleanup effort, a lot of them are efficiently and quietly doing what is expected of them across the world.

But in reality, not all of them are actually designed to response to spills. Instead, they are intended to prevent oil from getting into streams, lakes, ponds, and rivers. If there is a need for you to clean oil on top of the water in a retention pond, or other bodies of water like a marina, then they can perform such job. They also come in different types and each of them is designed for specific situations.

Tube Oil Skimmer

This type could clean big areas of water and can be sent out to the oil sheen by means of extending the tube to the water. The area that it can clean is limited by the tube’s length.

But the problem with this type is that it could take up a lot of space and can make the water that the tube is floating on not accessible to swimmers, equipment, and boats.

Belt Skimmer

This is another option that makes use of a stainless or poly steel belt. This type works in much smaller contained areas like tanks and smaller sized retention ponds where water could be brought to the skimmer.

This type of skimmer however, could not be expanded so it will have more pickup areas like that with tube oil skimmers as it has a vertical belt and collects oil directly.

Disk Skimmer

This kind of skimmer is compact and could pick up a lot of oil very quickly because of the big surface that it makes use of to pick up oil.

Related tags: Absorbent mats

Just like with the belt type, this one picks up oil that is actually on the water near the skimmer. It needs to be brought to the water or oil that should be circulated so that the oil on the water could be picked up by the skimmer. Moreover, this type is best for cleanup efforts.

Drum Skimmer

This skimmer is more like a drum as it lays horizontally in the water. In this one, the oil sticks to the drum and this is scraped off and then pumped to a storage tank.

Just like with a disk skimmer, this type should be taken to the oil or you can have the water moved to the drum. Also, this type works best in cleaning up oil spills on big bodies of water.

Knowing these different types of skimmers is very important so you can choose the best one for your specific needs.

Which One is Better Water Jet Cutting or LaserJet Cutting?

People are under the impression that they can be very straightforward when it comes to choosing between water jet cutting and laser jet cutting. There is no possible way you can say which one is better because each one of them is naturally more suitable for use in different materials. Each one can be utilized in different applications. Therefore, trying to choose between water jet and laser cutting, it would depend entirely to your specifications.  

As the name itself suggests, laser cutting involves the use of laser, it will help you to burn, melt or vaporize a material. During this process, a beam of focused light is used to carry out a cut design. The laser beam itself can be static and stationary or, depending on your cut-design, you can have it move across the material. 

Laser cutters perform extremely well with materials that have a thickness range between 0.12”  to 0.14”. This method of cutting is commonly used to cut sheets of medium-thickness steel.  

Water jet cutting machines are using a jet of high-pressure water and are often combined with an abrasive material such as garnet particles. Adding abrasive particles to the water itself will help intensify the water jet’s ability to cut through a material, thus reducing work time. 

Even if many people qualify laser cutting as some kind of complementary service to the water jet method, many are surprised to know that the latter is actually offering a wide array of advantages as follows: 

  • Adaptable to work with a wider spectrum of materials
  • Capable of cutting through materials whose thickness makes it difficult for the laser to cut.
  • The absence of the heat-affected zone (HAZ)
  • Easy on the environment. 
  • Safer to use compared to other cutting methods
  • No need to observe uniformity of material 
  • Higher tolerance level on thicker parts
  • Better edge finish

Even if laser cutters tend to work a nice job in cutting through non-ferrous materials, they tend to be quite thinner, much like wood and plastics. But the thing is when it comes to the edge some parts are usually burnt as brought about by the heat generated by this cutting method. On the other hand,  with water jet cutting, you can profile almost any material having a maximum thickness of 250mm as opposed to the laser’s 25mm thickness. 

These 2 cutting methods sometimes have outstanding features of their own and sometimes you need to take them into account when trying to decide which one is most suitable to your needs. Holes with a much smaller diameter compared to the level of thickness of the material can’t be lasered. In this case,  a waterjet machine is a much better option because it can handle extremely small holes. 

What About the Cost? 

Many people who consider laser cutting as the most cost-effective option for thin parts and are not actually bothered by its level of accuracy or quality of finish,  would usually settle for this method of cutting. Nevertheless, with water jet cutting and its ability to pile up sheets, is catching up fast and one important aspect to look into here is that as the level of thickness of the material increases, the natural tendency of the waterjet is to become even more cost-efficient.  

The Challenges of 3D Printing Service

For many years now, most of us have witnessed the unstoppable progress that 3D printing service, also known as additive manufacturing, has been making in terms of techniques employed, technologies being incorporated, and the various business organizations that are taking great interest from just a few companies before to several hundred now. 

Many industries are slowly but surely beginning to embrace this state-of-the-art cutting technology, and as this unfolds right before us, let us try to delve deeper to the possible challenges that you might encounter with this

Despite the bullish public perception regarding the tremendous growth and the great potential of 3D printing in many different applications in various industries, there are several challenges worth nothing first.

Almost every manufacturing stakeholders that are in charge of the 3D printing needs of their organization complain about some of these challenges. 

Here are the top challenges that the manufacturing sector faces with 3D printing: 

  • Cost of materials
  • Part quality
  • Difficulty in scaling operations
  • A limited selection of materials
  • Cost of system equipment
  • Technology limitations
  • Lack of in-house expertise

Despite the seemingly insurmountable challenges, many industry experts are optimistic that 3D printing service is bound to change the face of the manufacturing industry. 

We can’t get away from the fact that there is a very stiff competition in the manufacturing space, and that signifies that these perceived challenges are just mere stumbling blocks, they just need to overcome them. 

The manufacturing sphere must not only think about the technical rewards and benefits that 3D printing could bring but most importantly it must take into consideration the value it can add to any business. 

It is of paramount importance that business entities to not only just make an effort to identify applications and parts they can make use 3d printing for, but they also need to pay attention to how they can make it fit into their entire manufacturing strategy. 

Simply put, it is not about searching and looking for products that will the technology but seeing to it that the technology on hand will be fitting the business model itself and the product they have on offer.  

Manufacturing Challenges

The use and the application of 3D printing when designing for manufacturability is likely to become a challenge, too. 3D printing is not considered as a viable option over traditional manufacturing in any large scale production runs.  It is important for 3D printing to take into consideration the final production process during the design phase. 

If a particular component can be fabricated via 3D printing technology, but there would be some level of difficulty in replicating the same success when that part or component finally goes into production, then that only indicates that the project is a failure. This explains the reason why engineers and designers need to look into all the aspects of the project.  

Another major challenge in 3D printing is time.  Right now, the time and the cost needed to make one component or part may not be enough to sustain a full fabrication project. 

You can’t make use of 3D printing services to take the place of precision machining shops or machinery that makes the top of the line products in a timely fashion.  

Poly Diesel Fuel Tanks

Poly Diesel Fuel Tanks

We qualify poly diesel fuel tanks as a great alternative but they’re made even much better at a fraction of the cost.  

Even to this day, there are still many companies that are using off-site refueling facilities, and yet they have a fleet of machinery and vehicles. Often, with this kind of situation, they often end up with wasted time and higher costs.

If your business, your company is still using an off-site refueling, you may want to reconsider your choices. Here are some of the major reasons why having an on-site storage feature would work for your company’s best interest.  

High Level of Efficiency

The use of poly diesel fuel tanks can help your company save time and money. Hence, this option is highly efficient. An on-site fuel storage feature in your facility can help your team save the time that it takes them to travel to a nearby off-site fuel refilling station. In much the same way, refueling detours can be avoided as well.

This allows for better and more efficient management of time. Your on-site staff will have no need to leave the facility for refueling purposes of their vehicles or machines. Therefore, the time they saved on traveling to and from the nearest refueling station can be used instead of rendering their work and functions. More work can be accomplished, and by this virtue, your team’s overall efficiency will greatly improve.  

Theft Deterrent

One of the most complained issues in most companies is purloined fuel. Most of the time, this involves staff or employees who are cunningly taking good advantage of the company’s provided allowance for fuel for their own personal consumption or use. This is the reason why it poses a great challenge for companies to determine that it is indeed taking place inside their organization.  

By ensuring company drivers to refuel their vehicle only through on-site fuel storage tanks, you can keep them from engaging in their abusive practice in their fuel allowance.  A good fuel tank installed within your facility guarantees you full control over the company’s fuel reserve and usage of the same.

A poly diesel fuel tank in place will help you monitor who among your on-site staff is regularly using it or how often they are refueling up their vehicles or machines, and when they actually use it.

Rated Brand: Silvan Tanks

Saves You Money

Your company can enjoy a significant amount of savings if you have on-site fuel storage anywhere inside your facility.  The money you can save for your company can be fully optimized if you couple it with an effective system for fuel management.

It is wiser for companies to buy their fuel requirements in bulk, this way they get to enjoy lower prices. If you want to negotiate with a supplier for an even lower price, we highly recommend that you try to become a regular customer first and see to it that you are building a good relationship with them. In the long run, they will favor your request for a discounted rate on your fuel requirements.

It is high time that you reconsider your options and thinks about obtaining the above-mentioned benefits for your company by having your own fuel storage tank.

Resource:

https://bulkfuel.com.au/news/3-benefits-of-on-site-fuel-storage

The Anatomy of Vacuum Sealer for Food

The Anatomy of Vacuum Sealer for Food

In today’s modern society, it is very surprising to know that vacuum sealer for food is among the most effective kitchen tool in which the vast majority of homemakers have never ever considered to use. Crockpot, powerful juicer, and commercial grade blender are just a few of the most ubiquitous items that are now normally found in a modern  Australian family kitchen.

Despite this trend, the vacuum sealing machine has remained on the back burner for most domestic environments. It has remained as a rather elusive kitchen tool, which is a pity considering the fact that it is a very indispensable machine.  

Debunking the Stigma on a Vacuum Sealer

The manner in which a vacuum sealer works is all anchored to the principles or laws of air pressure. Small fans are being utilized to exact the air out from the storage bag,  where food is contained within, which helps in decreasing the bag’s air pressure. This measure renders the surrounding air pressure outside the bag to collapse it and thus force the remaining packets of air within to come out as well.

Most vacuum sealing machines are programmed to determine if the air inside a plastic bag containing food has been completely sucked out. This is the only point in time that the machine will finally seal it up, carried out by melting the plastic around or at the bag’s opening. It is crucial to have it airtight just so no amount of air could get back in.

Drawbacks

There is one pressing issue common in most non-commercial type vacuum sealing machines, moisture-sealing. Many food items are inherently moist such as raw meats and fruits. Trouble sets in when the food item that should be packed is intended to come with a marinade or some sauce. There is a probability that liquid would find its way into this area where the sealing would be put on. The more expansive the area is that needs sealing, the higher the chances are for the liquid to keep the area from being properly sealed, would get in.

Vacuum Seal Your Home Food Items

If you reach a certain point that you know exactly how your home appliances work, you can take this to your advantage and optimize their use for your family. Vacuum sealing machines are not an exception to this.

Food manufacturers are very much aware of this. The reason why they have some of their food item packagings come with built-in troughs — this will help capture moisture. Sad to say that troughs from a handful of sealers are integrated into. Once they are full, there is a level of difficulty when it comes to cleaning them. Aside from which, their gaskets are not durable and are thus prone to fray or damage.

It is such a relief to know that more vacuum sealing machines today come with removable or have detachable troughs. The purpose of which is to promote ease on the cleaning process. As for the gasket reliability, this is an aspect that is varying from brand to another brand.

Getting yourself familiar with the principles involved in how this machine works, you can go out and purchase for your home a suitable model. Soon, you will realize that freezer burns are no longer part of your kitchen life. Moreover, it will help lessen your kitchen waste and the best part of it all is that your food items will be fresher and taste better for longer.   More: shrink film

The Advantages that Waterjet Cutting Offers

The Advantages that Waterjet Cutting Offers

Waterjet cutting provides a unique process that could offer quality edge cuts while eliminating the need for a secondary finishing process. The machine is flexible, precise, and fast, thus offering a unique set of benefits compared with other techniques for metal fabrication.

What is it, exactly?

Waterjet cutting is a type of metal fabrication technique that uses a carbide nozzle, a high-pressure jet stream of water, and garnet abrasive to cut metals. Essentially, it is a higher and sped-up version of erosion in nature. The waterjet is being mixed with other types of abrasive particles that help speed up such process.

What are the Advantages?

Makes Cuts without Using Heat

Among the most important advantages of using this cutting method is its cold cutting quality. This allows materials to be cut that will be melted, burned, or cracked by other cutting processes. Also, it is a great solution for cutting materials that are more heat-sensitive. With this, costs because of thermal distortion to the machine parts are eliminated. Aside from this, it reduces the risk of fatigue failure which results from process-induced thermal stressing.

Other types of thermal processes could cause warping, harden the surface, and emit hazardous gases. But, a waterjet machine does not experience any thermals tress, thus there are no undesirable results.

Cuts Different Types of Materials

Compared to other types of the fabrication process, waterjet is capable of handling different products or materials that a traditional cutter can. Also, materials like rubber, glass, plastic, rubber, stone, laminated materials or those that have uneven surfaces could all be handled with the use of this technology.

Can Make Complex Shapes

The cutting method is very advantageous, especially in projects that need the ability to make complex shapes. Different materials could be cut into any shape. Additionally, sharp corners, pierce holes, bevels, and shapes that have minimal inner radii and possible. Moreover, nesting, stacking, and tabbing helps optimize materials and reduces the time needed for cutting.

More: water jet machine

Environmentally-Friendly

There is very little to no dangerous waste being produced when using this cutting method. As this danger is avoided, waste disposal cost is also reduced. Skilled operators could cut big pieces of re-usable scrap metals that might have been lost using a traditional cutting method. Aside from this, the cutting process allows for parts to be nested in order to maximize the usage of materials, thus saving the materials by means of minimizing kerf.

A waterjet also makes use of lesser water that you may have thought. The water used in it can be recycled with the use of a closed-loop system.

Indeed, technology has changed everything in today’s time. But the best thing about it is the fact that it has made everything easier for us while giving us the best results.

What Vacuum Sealer Should You Buy for Your Home?


What Vacuum Sealer Should You Buy for Your Home?

Everyone look for ways to save costs, conserve energy, and do things faster and easier. Many people are now becoming more practical and one way of doing this is investing in a food vacuum sealer for home use. It’s a great way to store leftovers, raw meat, vegetables, fruits, and other food items. Glass jars, plastic containers, and tins are a great way to store food, but they are not as good as vacuum sealers when it comes to prolonging the shelf life of the food.

Vacuum sealing the food allows you to store the food longer than you would if you use jars and other containers. What makes these machines unique is their technology of sucking all the air out from the sealer bags, locking in the moisture and keeping the food inside fresh. The food will not have a freezer burn and it will not dry out. Removing the air inside also means removing the possibilities of contamination and spoilage.

Many homeowners are looking for affordable sealing machines they can buy to use at home. These machines come in many sizes and models, and choosing the right one can be overwhelming. Many homeowners get confused about which sealer machine they would want for their home. To help make your selection easy, consider the material, the features, and specifications. You also need to think about what food you want to store and how you want to store it. You don’t want to buy a sealer machine that has features you couldn’t use.

Plastic Sealers

Vacuum sealing machines that are made from plastic materials is the most common type of sealer used for household use. Plastic sealing machines use plastic bags or plastic rolls to store food items. The machine vacuums the air surrounding the food and seals the plastic bags. Plastic sealing machines and their plastic bags are available in local stores and online store. These machines are great for any type of food such as raw meat, seafood, leftovers, vegetables, fruits, and other food products you want to store.

Container Sealers

Liquid foods such as soups, sauces, and other liquids are best stored in cans, jars, and plastic containers than in sealer bags. If you are storing food this way, then you will need a container vacuum packaging machine. These machines can be easily found in stores as well. Vacuum sealing containers can help extend the life freshness of the food inside the jars and plastic containers. Container sealing machines are becoming popular because not only they help preserve the food, but they also keep the food inside the jar or container from leaking.

You can also find vacuum sealing machines with combine features for greater versatility. These machines are great in preserving food and from keeping the food from leaking out. It will also prevent any foul odor from the food from coming out from the package. Depending on the brand, the material, features, and model, these machines can be expensive, but they are a good investment because they will help you save money in the long run.

More :cryovac bags

Above Ground Fuel Tanks How to Prevent Water Resources Contamination

Above Ground Fuel Tanks How to Prevent Water Resources Contamination


Above Ground Fuel Tanks: How to Prevent Water Resources Contamination

Fuel tanks can be above ground or underground, depending on its application on the facility. An above ground fuel tank usually use a stand or a tripod as its supporting structure, while some of these tanks are bunkered or partially buried on the ground. Farms, factories, and many other industries use fuel tanks to store petroleum products for their operations.

Above ground fuel tanks are much safer to use than the underground fuel tanks because they are easier to maintain and check for any leakage and corrosion that may harm the environment. Leakage from fuel tanks can be very dangerous to the environment. Even the smallest drop of leak can cause contamination of water resources, and also endanger the lives of people, animals, plants around. Fuel spills can accumulate in the soil and rainwater can carry it to water resources. A small drop of fuel can destroy a huge body of water and can wipe out an entire aquatic habitat. Furthermore, it can pollute the water source for livelihood consumption especially for drinking.

However, proper monitoring is still very important because the fuel tanks are still prone to have spillage and other accidents. Since the tank contains a hazardous substance, extra care and attention is needed. Watch out for piping system failures, holes caused corrosion, equipment failure, overfills, and even personnel mistakes.

Consider the Location

When installing an above ground fuel tank, consider the distance of the site to water sources including wells, streams, ponds, rivers and sewers. The tank must be set-up away from these water sources. Also consider other factors such as volume of material stored, drainage patterns, distance to surface water and weather conditions. In severe weather conditions as in a storm, can you be sure that any spilled liquid will not flow directly to any water source?

Choose the area carefully where you will install the fuel tank. Make sure it is away from water resources such as sea, rivers, streams, ponds, wells, and sewers. Read the standards to consider the distance of the fuel tank and water source. Consider other factors such as patterns of drainage, the amount of fuel contained, and weather conditions. Make certain that the area is not prone to floods as well.

Never Overfill

Follow the standard in refilling the tank, and make sure that your personnel is also aware of this. It is crucial that you fill the tank up to its holding capacity only. This is a basic procedure to prevent spillage. As much as possible, choose bunded tanks because these tanks have double steel walls, which are designed specifically to contain any possible leakage. This double-walled tank prevents spillage and it also provides protection from corrosion.

Monitor the Tank Regularly

Regular monitoring of the fuel tank is necessary to ensure that there is no leakage. Through routine monitoring, the tank will also be checked if there is any corrosion or early signs of damage. Fittings, seals, and linings must be inspected by an engineer to make sure everything is secure and in place. Periodic inspection must also be implemented.

Clean the Tank and the Premises Regularly

Keep the tank and the premises clean. Make sure there are no debris, dirt and other stuff that could obstruct the pathway for cleaning and maintenance. Collect any rain water that might have accumulated in the tank.

Make Sure to Meet the Australian Regulations and Standards

Ultimately, follow the guidelines set by the authorities to ensure safety of usage and prevention of water resources contamination.